Description
High-quality decorative satin wall paint based on 100% acrylic resins in water dispersion. For indoor use.
Use
Ideal for renovation and new builds. Finishing coat for indoor walls and ceilings. Can be applied to various surfaces such as masonry, plaster, plasterboard, mineral renders, cement, concrete, etc., and over old paint.
Properties
- High covering power.
- Easy to apply.
- Very attractive decorative finish.
- Washable once fully cured
Surface preparation
For good results, the surface must be carefully prepared. New surfaces: remove any loose material from the surface to be painted; clean and remove dust; allow to dry; apply a suitable primer (e.g. Sinova Perfocryl Primer or Sinova Fix&Egal Primer). Renovation: remove any loose material from the surface to be painted; degrease old coatings, key the surface and remove dust; fill if necessary; apply a suitable primer if needed (e.g. Sinova Fix&Egal Primer).
Application
Brush, roller or airless spray (pressure 145–165 bar, tip 517). Ready to use. Absorbent surfaces: thin the 1st coat with 5–10% water. Mix well before use and before thinning. Apply in cross-strokes to spread the product evenly.
Cleaning tools
With soap and water, immediately after use
Finish
White, plus colours from our colour charts mixed on our tinting machines. Appearance: satin.
Specifications
Binder: 100% acrylic resin. Pigments: titanium dioxide and mineral fillers. Solvent: water. Coverage*: 12–14 m²/L per coat. Density: approx. 1.43 g/ml. Solids content (by weight): 53.5–55.5%. (*) Coverage is based on work by a professional on a surface with normal absorbency, and may vary depending on working method, surface and weather conditions.
Drying time
Touch dry: 1 hour. Recoatable: approx. 4 hours (normal weather conditions).
Limitations
Do not apply at temperatures below 10°C or relative humidity above 75%.
Storage
At least 12 months in unopened original packaging, in a cool, dry place. Protect from frost.
Packaging
1 L and 4 L metal tins; 10 L plastic bucket.
EU limit values (VOC)
Cat. A/a: 30 g (2010). This product contains less than 30 g/L VOC.