Very durable satin lacquer paint, based on waterborne acrylic-PU resins, for interior use.
Description
Satin lacquer paint, low in solvent, very durable, for interior and exterior, based on waterborne acrylic-urethane resins. Of superior quality, this lacquer offers excellent resistance to scratches and wear. It has the application characteristics of traditional synthetic lacquers, without their drawbacks (odor).
Purpose
Intermediate and high-end, very durable finishing coat for interior and exterior. Applicable on most substrates used in construction and prepared with a suitable primer, such as wood, MDF, metals and plastics, concrete wall surfaces, plaster, fiber cement, plasterboard, glass veil, …
Properties
- Easy application – Excellent flow resulting in a beautiful decorative appearance.
- High covering and opacifying power.
- Long open time.
- Low odor. Environmentally friendly.
- Durable elasticity.
- Highly washable and scrub-resistant – Resistant to grease and household detergents – Scratch resistant.
- Non-yellowing.
- Permeable to water vapor.
Surface preparation
To achieve good results, the surface must be well prepared. New surfaces: Clean and dust off; allow to dry thoroughly; apply the appropriate primer (Sinova Multiprim+). Renovation: Remove parts not adhering to the surface to be painted; degrease old layers, dull and dust off; touch up if necessary; apply a suitable primer if needed. Wood: The wood must be dry (max. 18% moisture). If needed, isolate wood knots with an isolating primer (Sinova Multiprim+). Metals: Treat any rust and, if necessary, apply a rust inhibitor. On metals exposed outdoors (even if sound), apply a suitable primer (rust inhibitor).
Application
Long-haired brush (for acrylic), smooth-felt roller or flocked lacquer roller, spray gun. Dilute 5% with water in case of high temperature to extend open time. Stir well before use and before dilution. Sand lightly between coats – preferably with a scrubbing pad.
Cleaning of tools
With water and soap, immediately after use.
Finish
Color: white and shades from our color charts achievable with our machines. Appearance: satin.
Characteristics
Binder: acrylic resin and urethane polymer. Pigments: titanium dioxide and natural fillers. Solvent: water. Coverage*: ~12 m²/L Density: ~1.30 g/ml. Dry extract (weight): 48 to 52%. (*) Coverage is calculated based on the work of a professional craftsman, on a substrate with normal absorption, and may vary depending on working method, substrate, and weather conditions.
Drying time
Dust-free dry: ~1 hour. Touch dry: ~2 hours. Recoatable: ~6 hours. (Under conditions of 20°C and 50% relative humidity; drying time will be longer if temperature is lower or humidity higher).
Limitation
Do not apply at temperatures below 10°C and relative humidity above 80%.
Storage
Minimum 12 months in unopened original packaging, in a dry and cool place. Keep from freezing.
Packaging
Metal can of 1L and 2.5L.
EU limit values (VOC)
Category A/d: 130g (2010). This product contains a maximum of 2g/L of VOC substances.
