Very durable satin lacquer paint, based on waterborne acrylic-PU resins, for interior use.
Description
Satin lacquer paint, low in solvent, very durable, for interior and exterior, based on waterborne acrylic-urethane resins. Of superior quality, this lacquer offers excellent resistance to scratches and wear. It has the application characteristics of traditional synthetic lacquers, without their drawbacks (odor).
Purpose
High-end and very durable intermediate and finishing coat for interior and exterior. Applicable on most substrates used in construction and prepared with a suitable primer, such as wood, MDF, metals and plastics, concrete wall surfaces, plaster, fiber cement, plasterboard, glass veil, …
Properties
- Easy application – Excellent flow resulting in a beautiful decorative finish.
- High covering and opacifying power.
- Long open time.
- Low odor. Environmentally friendly.
- Durable elasticity.
- Highly washable and scrub-resistant – Resistant to grease and household detergents – Scratch resistant.
- Non-yellowing.
- Permeable to water vapor.
Surface preparation
To achieve good results, the surface must be well prepared. New surfaces: Clean and dust off; allow to dry thoroughly; apply the appropriate primer (Sinova Multiprim+). Renovation: Remove parts not adhering to the surface to be painted; degrease old layers, dull and dust off; touch up if necessary; apply a suitable primer if needed. Wood: The wood must be dry (max. 18% moisture). If needed, isolate wood knots with an isolating primer (Sinova Multiprim+). Metals: Treat any rust and, if necessary, apply a rust inhibitor. On metals exposed outdoors (even if sound), apply a suitable primer (rust inhibitor).
Application
Long-haired brush (for acrylic), smooth felt roller or flocked lacquer roller, spray gun. Dilute 5% with water in case of high temperature to extend open time. Stir well before use and before dilution. Sand lightly between coats – preferably with a scrubbing pad.
Cleaning of equipment
With water and soap, immediately after use.
Finish
Color: white and shades from our color charts achievable with our machines. Appearance: satin.
Characteristics
Binder: acrylic resin and urethane polymer. Pigments: titanium dioxide and natural fillers. Solvent: water. Coverage*: ~12 m²/L Density: ~1.30 g/ml. Dry extract (weight): 48 to 52%. (*) Coverage is calculated based on the work of a professional craftsman, on a surface with normal absorption, and may vary depending on working method, surface, and weather conditions.
Drying time
Dust-free dry: ~1 hour. Touch dry: ~2 hours. Recoatable: ~6 hours. (Under conditions of 20°C and 50% relative humidity; drying time will be longer if temperature is lower or humidity higher).
Limitation
Do not apply at temperatures below 10°C and relative humidity < 80%.
Storage
At least 12 months in unopened original packaging, in a dry and cool place. Keep from freezing.
Packaging
Metal can of 1L and 2.5L.
EU limit values (VOC)
Cat. A/d: 130g (2010). This product contains a maximum of 2g/L of VOC substances.
